Hydraulic Power Unit Rental in the UAE: Onshore, Offshore and Subsea Applications
A hydraulic power unit rental gives you a self-contained HPU that converts electrical or engine power into pressurised hydraulic fluid to drive cylinders, motors, and tooling without the capital cost of ownership. Tensor offers hydraulic power units for hire in the UAE for onshore, offshore, and subsea applications, including units compatible with subsea control fluid such as water-glycol Oceanic HW fluids.
This page covers what an HPU is, the configurations available, subsea-fluid compatibility, and certification.
What Is a Hydraulic Power Unit?
A hydraulic power unit, also called a hydraulic power pack, is a self-contained system comprising a reservoir, pump, drive, filtration, cooling, and controls. It generates the flow and pressure needed to operate hydraulic equipment and is widely used for testing, flushing, tooling, and temporary or backup hydraulic power on projects.
HPU Specifications and Configurations
HPUs are configured to project requirements.
Typical options include:
| Parameter | Typical Options |
|---|---|
| Drive | Electric or diesel |
| Pressure | Configurable to requirement, for example up to around 350 bar |
| Flow | Selected to suit the application |
| Fluid | Mineral oil, water glycol, or subsea control fluid |
| Filtration and cooling | Built-in, micron-rated filtration with oil cooling |
| Cleanliness | Flushed to NAS 6 or similar before rental |
| Certification | ATEX and DNV 2.7-1 options for hazardous and offshore use |
HPUs for Subsea Control Fluid
For subsea production control work, HPUs can be supplied compatible with water-based water-glycol control fluids such as Oceanic HW 540 and HW 525, rather than mineral oil. These units use the correct seals, materials, and filtration for the control fluid and are suited to testing, flushing, and powering subsea control equipment to the system specification.
Applications of Hydraulic Power Unit Rental
Hydraulic power units can be used for:
- Hot oil flushing and system flushing using test-and-flush HPUs
- High-pressure testing and commissioning support
- Powering hydraulic tooling and equipment
- Subsea control system testing and operation
- Temporary or backup hydraulic power during maintenance
Where the priority is cleaning a system to a cleanliness class, you can use a dedicated oil flushing skid rental service.
Certification and Safety
For offshore and hazardous-area work, HPUs can be supplied in ATEX-certified enclosures rated for the relevant zone, with DNV 2.7-1 certified frames and lifting points for safe handling. Built-in flow meters, filtration, and oil cooling support safe, monitored operation.
Confirm the certification and area rating required for your specific site before selecting the rental hydraulic power unit.
Why Rent a Hydraulic Power Unit?
Hydraulic power unit rental can help businesses:
- Avoid capital outlay for equipment needed only on certain projects
- Choose the right-sized unit with flow, pressure, and fluid matched to the task
- Use certified and serviced equipment with ATEX and DNV options
- Support rapid mobilisation with delivery and commissioning on site
- Access flexible rental terms for short-term, emergency, or peak-load hire
Hydraulic Power Unit Rental in the UAE
Tensor provides hydraulic power unit rental across the UAE for onshore, offshore, and subsea applications, with ISO-compliant procedures, certification options, and on-site support. Tensor can combine HPU rental with flushing, testing, and pre-commissioning services through a single provider.
Request a quote for hydraulic power unit rental in the UAE, or explore Tensor’s full rental solutions.
FAQs
A hydraulic power unit is a self-contained system with a reservoir, pump, drive, filtration, and controls that converts electrical or engine power into pressurised hydraulic fluid to drive cylinders, motors, and tooling.
Yes. Test-and-flush HPUs combine hydraulic power with high-capacity filtration so they can both power equipment and flush a system to a cleanliness class. For dedicated cleaning, an oil flushing skid rental solution may also be suitable.
Yes. HPUs can be supplied compatible with water-based water-glycol subsea control fluids such as Oceanic HW 540 and HW 525, using the correct seals, materials, and filtration for the control fluid.
HPUs can be supplied with ATEX-certified enclosures for the relevant hazardous zone and DNV 2.7-1 certified frames and lifting points for offshore handling. Confirm the certification needed for your site before rental.
HPUs are configured to the project, with pressure and flow selected to suit the application, for example up to around 350 bar. Tensor’s team validates the flow, pressure, and power requirements to recommend the right unit.
Tensor provides hydraulic power unit rental across the UAE for onshore, offshore, and subsea applications, with certification options and on-site support. Tensor can also combine HPU rental with flushing and testing services.
